Beijer Electronics (formerly QSI Corporation)

Manufacturer of Mobile Data and Human Machine Interface Terminals.
It is currently Wed Nov 22, 2017 5:34 am

All times are UTC - 7 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Treq-L rejects booting
PostPosted: Fri Dec 04, 2009 12:52 pm 
Offline

Joined: Fri Dec 04, 2009 12:50 pm
Posts: 2
Hi all!

I had some problems while testing the Treq-L device:

I was debugging and suddenly the device didn´t react to the deployment command which I iniciated at my developing PC in Visual Studio, eventhough the connection was stable (also confirmed by Visual Studio connection manager). After doing a hard reset the device now doesn´t start again.

I checked the power supply with one of our electrical engineers. Even inside the device we could not find a strange behavior until the switching regulators (which distrubte the power to the several parts of the circuit board.) we had around 14 Volts. For the logics after the regulators we measured around 2.8 Volts but we don´t know what the board needs in this parts. After testing we got the impression that the power supply seems to be okay and maybe it is more a software/booting problem. Maybe we have to reset or update the bootloader somehow (i.e. by taking the flash-card and copying an update on the same through another machine?) Or do you know another way to reset / repair the booting options.

I would be very glad if someone can help us, because we have to completely stop the testings on the device, if it is not accesible. On the M-4 I have the problem that I cannot debug that easy, through the WLAN Stick (no drivers for the treq-M4?). As we work with an external third device (for GPS and GSM communication) using an emulator is also not the best option for testing our software.

Thank you very much!
With best regards
Albert K.


Top
 Profile  
 
PostPosted: Fri Dec 04, 2009 4:13 pm 
Offline

Joined: Fri Dec 04, 2009 12:50 pm
Posts: 2
Problem solved:

have to Update/Reset WindowsCe after a Software crash (if device doesnt react even with power supply)

1. open the treq-l device (be aware: waranty will be lost!)
2. take out the Flash-CF-Memory Card
3. connect the card via card-reader to the PC
4. copy the file "NK.bin" (contained in the WinCE Image for Treq-L which you can get from QSI support) to the root of the flashcard.
5. put the card back to the device, close it and restart

=> :mrgreen:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group