Beijer Electronics (formerly QSI Corporation)

Manufacturer of Mobile Data and Human Machine Interface Terminals.
It is currently Thu Nov 23, 2017 11:22 am

All times are UTC - 7 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Fri Feb 04, 2011 12:37 pm 
Offline

Joined: Tue Nov 18, 2008 11:59 am
Posts: 19
Hi -
I've been in the process of migrating some code from a G55 terminal to the G56 and am having some troubles.
Just got the code ready for the G56 terminal to run and I can download it to terminal fine (over serial port from Qlarity Foundry 2.6 - Download application) but the application won't persist through power cycle. I've been trying to get into the "Power on setup" but can't seem to get to it. I've tried pressing on upper left quarter of screen (screen is in landscape mode) on power up - it just boots into Windows CE. (Is this the default OS?) Holding down three buttons (like the G55 uses) doesn't do anything...

I've performed the stylus calibration process - through the control panel as the calibration quarter of the touchscreen doesn't do anything on power up either.

I also don't have a hardisk\bin or hardDisk\bin directory that is supposed to hold a variety of files for the CE environment - such as the demo,boot.bat, etc.


Thanks in advance for the help.

-JT


Top
 Profile  
 
PostPosted: Fri Feb 04, 2011 12:45 pm 
Offline
QSI Support
QSI Support
User avatar

Joined: Wed Mar 08, 2006 12:25 pm
Posts: 881
Location: Salt Lake City, Utah
Based on the fact you are migrating from a G55 to a G56, it sounds like you have have received the wrong terminal configuration.

The G56 comes in two "flavors" -- Qlarity flavor and Windows CE flavor. It sounds like you received a Windows CE flavor unit but you want a Qlarity flavor unit. I would suggest contacting your sales representative and verifying which type of unit you have purchased/demoed.

A Qlarity flavor G56 should behave identically to your G55, except it will be faster and will have a touch screen in addition to the keypad.

_________________
Jeremy
http://www.beijerinc.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group