Beijer Electronics (formerly QSI Corporation)

Manufacturer of Mobile Data and Human Machine Interface Terminals.
It is currently Tue Nov 21, 2017 8:33 pm

All times are UTC - 7 hours




Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Mon Mar 16, 2009 1:17 pm 
Offline
User avatar

Joined: Thu Mar 02, 2006 2:12 pm
Posts: 487
Location: Salt Lake City, Utah
Quote:
Since the TREQ-M4 has WinCE 6.0, does it work with Visual Studio(VS) 2005 and the .NET Compact Framework(CF) 2.0?


Yes, although it is recommended that you use VS 2008, VS 2005 will work with the TREQ-M4, but you may lose the debugging functionality for a .NET CF application.

The default .NET CF for VS 2005 is 2.0 while the TREQ-M4 has been pre-installed with .NET CF 3.5. If the project setting of "Deploy the latest version of the .net compact framwork" is checked, it will load the .NET CF 2.0 to unit which will fail because the initial storage memory we assigned is pretty small. If you un-check it, all API's for 2.0 should still work under 3.5, but debugging functionality will be lost. The release build of app will run fine.

There is one way to debug .NET CFin VS 2005. Increase the storage memory at control panl->system->memory and check the setting "Deploy the latest version of the .net compact framwork" in VS. This will allow the debugger to load .NET CF 2.0 to the unit when you deploy your application in debug mode. However, after power off, the allocation will go back to default, and you'll have to repeat the change.

_________________
Ron L.

http://www.beijerelectronicsinc.com/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 7 hours


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group